MTH 80-2238-1 HO Scale EMD GP35 Diesel Chesapeake & Ohio C&O 3536 PS3

USED

Produced from 1963 to 1966, the GP35, along with its six-axle SD35 sibling, marked both an end and a beginning. They were the last road diesels to use the EMD 567 motor that had powered switchers, F-units, and Geeps since 1939 (so named because each cylinder displaced 567 cubic inches). For the horsepower race of the 1960s, EMD tweaked the 567 to a turbocharged V-16 delivering 2500 hp. That was it for the 567, however, and in 1966 the baton was passed to the more powerful model 645. But while the “35 line” diesels ushered out an old motor, they inaugurated a new look. Their angled cab roofs and the clean, squared-off lines of their car bodies established the look of EMD power for the next three decades.

Introduced to compete with General Electric’s landmark U25B, which had ushered in the second generation of diesel power, the GP35 outsold the “U-Boat” nearly three to one. There was a strong market for new power in the mid-1960s because the first-generation diesels that had vanquished steam were wearing out. While first-generation rosters had often been a hodgepodge of manufacturers and models as railroads experimented with the new technology, by 1960 Alco, EMD, and GE were the only manufacturers left standing – and Alco would soon throw in the towel. As a result, virtually every major U.S. railroad became a GP35 customer and over 1300 engines were sold in the United States, Canada, and Mexico.

In what we believe is the finest, ready-to-run HO GP-35 diesel to ever be produced, HO modelers will find the best combination of detail, realism, and performance of any 1/87 scale GP35. Added-on detail parts include windshield wipers, metal see-thru body grilles, lift rings, metal grab irons and handrails, see-thru rooftop fan housings, and brake cylinders, air pipes, and swing hangers on our super-detailed Blomberg trucks.

This highly detailed model includes a broader range of features than you’ll find on any other HO scale diesel, including lighted number boards; smooth performance from a three-scale-mile-per-hour crawl to full throttle; “cruise control” for steady speeds regardless of curves, switches and grades; built-in decoders for DCC and the M.T.H. DCS Digital Command System; and a full range of sounds recorded from a prototype GP35. If you’re looking for durable motive power that’s accurately detailed, smooth running, and a great deal of fun to operate, it doesn’t get any better than this.

FEATURES:

• Intricately Detailed ABS Body
• Authentic Paint Scheme & Cab Numbers
• RP-25 Metal Wheels Mounted On Metal Axles
• Constant Voltage, Directional Headlights
• Prototypical Rule 17 Lighting
• Detailed Truck Sides
• Detailed Cab Interior
• Powerful 12-Volt 5-Pole Precision Skew-Wound Flywheel Equipped Motor
• (2) Scale Kadee Compatible Remotely Controlled Proto-Couplers
• (2) User-Installed Kadee Magnetic Couplers
• Decorative Metal Horn
• Locomotive Speed Control In Scale MPH Increments
• On-Board DCC Receiver
• Operates On Code 70, 83, & 100 Rail Curves

Proto-Sound 3.0 equipped locomotives can be controlled in command mode with any DCC compliant command control system. While the user won’t have access to all of the incredible features of Proto-Sound 3.0, independent control over the locomotive is possible. This means you can continue to use your existing DCC controller to independently control your other DCC equipped locomotives in addition to your Proto-Sound 3.0 locomotive on the same track at the same time.

When using a DCC controller, the following Proto-Sound 3.0 locomotive features are accessible:

• Headlight/Taillight
• Bell
• Horn
• Start-up/Shut-down
• Passenger Station/Freight Yard Announcements
• Lights (except head/tail)
• Master Volume
• Front Coupler
• Rear Coupler
• Forward Signal
• Reverse Signal
• Grade Crossing
• Idle Sequence 3
• Idle Sequence 2
• Idle Sequence 1
• Extended Start-up
• Extended Shut-down
• Rev Up
• Rev Down
• One Shot Doppler
• Coupler Slack
• Single Horn Blast
• Coupler Close
• Engine Sounds
• Brake Sounds
• Cab Chatter
• Feature Reset
• Idle Sequence 4
• Clickety Clack (On/Off)
• Proto-Sound 3.0 With The Digital Command System Featuring: Freight Yard Proto Effects
• Unit Measures:
• Operates On 18″ Radius Curves

NOTE: NOS (New Old Stock) / USED items are as-is and not returnable. If you have any questions please ask before purchasing.